Vac & Steam

Steam

Safe and effective for your floors

Vac & Steam

2-in-1 Vacuum and Steam Mop

Sanitize hard floors without the use of harsh chemicals

The BISSELL Vac&Steam is a Multifunction 2-in-1 vacuum and steam mop that vacuums and steams at the same time or separately. The electronic one touch fingertip controls in the handle make it easy to switch from vacuum to steam or use both easily.

Save time by vacuuming debris and steaming hard floors at the same time killing 99.9% of all germs & bacteria all around the home using just water. Built-in water filter to remove any impurities in the tap water to help protect your machine. Dry-tank technology keeps debris in the dust bin completely dry and away from the steam at all times. Its easy empty button feature makes clean up after use simple and easy. Two vacuum filters - foam and pleated are both washable and trap fine dust & debris to provide clean exhaust air back in to the room

2-in-1 Vacuum and Steam Mop

A powerful cyclonic action vacuum and steam cleaner in one you can now steam clean and pickup dry debris in one pass

Cleans and sanitises as the super heated steam breaks down dirt, grime and bacteria to leave surfaces truly spotless. Killing 99.9% of all germs & bacteria all around the home

Electronic variable steam control to automatically control the steam output to suit different surfaces around the home

The Steam on demand feature provides instant steam where and when you want it for concentrated cleaning performance

Electronic one touch fingertip controls in the handle make it easy to control the steam feature and switch from Vacuum to steam or use both easily

NEW Unique DropIt dirt tank that allows the hair & debris to be disposed of hygenically… and without touching it!

Dry-tank technology keeps debris in the dust bin completely dry and away from the steam at all times., and its easy empty button feature makes clean up after use simple and easy

The easy to remove mop pad tray makes putting on or removing pads easier than ever

Two vacuum filters - foam and pleated are both washable and trap fine dust & debris to provide clean exhaust air back in to the room

Built-in water filter to remove any impurities I the tap water to help protect your machine

Scented cleaning provided with two scented disc' that fit in to a unique pocket in the Microfibre cleaning pads

Read More

* readyin30sec|cyclonicvacuumaction|15minpertank|steamcontrol|2in1actionsavestime|wet_dryseparation|easyremovemoppadtray|hardfloorssafe

General specifications

Cleaning surface Sealed hard floors, Low pile carpets, Area rugs
Color Titanium & Blue
Wattage/Power 1600 W - Combined Vacuum & Steam

Techical specifications

Water tank capacity (L) 0.4 L
Cord length (m) 7.6 m
Dirt bin capacity (L) 0.95 L
Easy empty dirt bin Yes
Fingertips controls Yes
Pick up hard floor 0.97
Heater type Flash Heating System
Included in the box Vac & Steam, Microfiber Mop Pads with Microban Antimicrobial Product Protection, User Guide
Mop pad composition White/Grey - Polyester 65%, Polypropylene 14%, Polyamide 21% White - Polyester 86%, Polypropylene 14%
Mop pads 2 x Mop Pads (1 x Soft / 1 x Scrubby Pad)
Noise level (dB) 81 dB(A)
Pick up carpet Not Applicable
Ready to use in 30 seconds
Scented refresher discs Yes - 2x
Steam filter Yes - Replaceable
Steam temperature 90° - 95°
Steam Pressure Not Applicable - Flash Heater Technology
Steam run time (min) 15 minutes
Vacuum filter Yes - Washable
Vacuum filter type Washable Foam and Pleated Vacuum Filter
Steam variable Yes - Fingertip Control
Water tank capacity (L) 0,4 L
Steam on trigger Yes
Weight 4.8 kg
Removable water tank No
You have no products to compare.

FAQ

This machine can be used as a vacuum and a steamer at the same time. Follow the table below for instructions of settings. it can also be run just as a vacuum and just as a steamer. There are 6 different settings for this machine. See table below of how you can use this machine:

instruction of settings vac & steam

If the filter is hard to remove, take out the hose and then use the "grips" on the filter to pull out. Start by pulling the lower hose out first, then turn the upper hose to the left until it pulls out. Then grasp the filter on each side and pull straight out. The "dummy" filter has a slight grip. The white filter has two grips, one on each side.

Wash on regular cycle with mild detergent only for best results. Do not use bleach, it could cause the break down of the pad. It is not recommended to use any fabric softener with the micro fiber pads.

DO NOT USE VINEGAR OR ANY OTHER SOLUTION OTHER THAN WATER OR BISSELL STEAM MOP DEMINERALIZED SCENTED WATERS IN THE TANK.

1. Make sure the correct tank has water in it. (Water tank and not the dirt cup).

2. Make sure the "Steam Ready" LED light has finished blinking (about 30 seconds). Wait until the light goes solid and attempt to steam.

Make sure the "Steam Ready" LED light has finished blinking.

3. Make sure the steam setting LED light is on "HI" If it is not lit, the machine will not steam.

Make sure the steam setting LED light is on "HI" If it is not lit.

4. Make sure you are holding the trigger on the handle up to two minutes to get the unit to prime.

5. Make sure the filter** is properly seated. Remove the cartridge. Examine to make sure the black gasket is still on the outside of one of the two ports of the cartridge. there is an "X" valve inside the hole this port fits into. Push on this to make sure water flows (make sure the machine is unplugged). Use the palm of your hand with force to firmly push the cartridge in place to make sure it is fully seated. This will make sure the pump is not sucking air around the gasket. **Not all machines have a water filter. Some have a "dummy" filter. A filter is required for this machine, just not a water filter, it is optional.

Dummy filter vac & steam

There should be no gap between the filter and the machine when it is installed properly (right).

There should be no gap between the filter and the machine when it is installed properly.

6. Plug the machine back in, wait 30 seconds for the "Steam Ready" LED to stop blinking. Place the "HI" button light to the "HI" LED. Hold the handle trigger closed for two minutes.

7. Has a new filter been installed? If so, hold the trigger down at least 2 minutes to allow the filter to fill up with water. It should then start steaming. You may also soak the filter for 10 to 15 minutes to saturate the filter.

8. Take the foot off the machine, remove the foot tray and also the pad and ream the steam tip on the foot as well as the foot tray with a paper clip to remove any obstructions.

ream the steam tip on the foot as well as the foot tray with a paper clip to remove any obstructions

What type of flooring is being cleaned? Abrasive flooring such as rough tile, brick, etc. will impact the pad more-so than a smooth vinyl flooring. If abrasive flooring is being cleaned, you will go through more pads than if cleaning smooth flooring.

Wash mop pads in wash machine with a mild detergent. DO NOT ADD fabric softener or bleach. Doing so could break down the pads quicker and cause holes.

What type of flooring is being cleaned? Abrasive flooring such as rough tile, brick, etc. will impact the pad more-so than a smooth vinyl flooring. If abrasive flooring is being cleaned, you will go through more pads than if cleaning smooth flooring.

Wash mop pads in wash machine with a mild detergent. DO NOT ADD fabric softener or bleach. Doing so could break down the pads quicker and cause holes.

About BISSELL

BISSELL is a family owned company that has been a leader in the homecare business for over five generations. We have a deep commitment to understanding the lives and cleaning needs of our consumers. That fundamental belief leads us to researching their home environments and cleaning habits.

Read more

Buy our product

Retailers are coming soon