Powerful high pressure handheld
Use the Steam Shot to soften and
remove stubborn dirt, grime, dry,
hardened food and other household
soil from many different surfaces
around your home: kitchen,
bathroom and much more.
Includes multiple tools for many
*Test for color fastness in a hidden area
Ease of use
BISSELL Steam Shot gives you a chemical-free deep clean using only tap water with the power of steam in a hand held unit, killing bacteria around your home.
Powerful steam cleaning unit with 1000 watts generating 4.5 bar pressure, with the steam on demand trigger you can provide steam wherever you need it.
Includes pouring jug, extension hose, detailed brush kit with 3 color coded brushes, angled concentrated tool, window squeegee, flat pad, flat scraping tool, 2 microfiber cleaning cloths, accessory nozzle for a deep clean around your home.
|Color||White & Red|
|Surface||Countertops, Sinks, Grout, Bathrooms, Walls, Tiles, Kitchen|
|Steam Run time||15 minutes|
|Ready to Use in||60 seconds|
|Steam Pressure||4.5 Bar|
|Water Tank Capacity||360 ml|
|Steam on Demand Trigger||Yes - via trigger in handle|
|Cord Length||4.8 m|
|Hose Length||0.8 m|
Recommended for you...
Brushes Steam Shot
Frequently Asked Questions
- The light will turn off when the machine is ready to spray steam. This may take a few minutes.
- Unplug the machine and wait (about 5 minutes) for the machine to spray. Check to see if there is water in the tank. When the machine is cool, you can then add water.
Wait until the red indicator shuts off. Once the light is off, your machine should be ready to use. This may take a few minutes.
After the machine is cooled down (about 5 minutes) make sure there is water in the tank. Make sure the red indicator is off. The light will turn off as soon as the machine is hot enough to spray steam. If the light is still red, the machine will not spray.
To check if the nozzle is clogged. Take the tool off from the machine and see if the machine sprays without the tool connected. If the unit sprays without the tool attached, clean the spray tip on the tool with the end of a paper clip. If the machine does not spray without the tool, wait about 5 minutes for the machine to cool. Then clean the nozzle with a paper clip.